|
© RL Stephens Tool, 2003. All Rights Reserved.
|
|
Site Designed and Maintained by:
|
|
MACHINE TOOL PROBES
lnspection Probes for Machine Centers - MP10
|
|
The MP10 an optical transmission part probing system for use
on machining centers. The MP10 is available with either 35 degree or 70 degree output. The probe is turned on using either and M code or the auto-start feature and turned off using an M code or internal timer. |
|
1717 North Raymond Avenue • Anaheim, California 92801
|
|
Toll Free: 1 - 800 - 826 - 5133
|
|
Local Phone: 714 - 879 - 6637 • Fax: 714 - 879 - 0911
|
|
Part Number: MP10 - NS - S
|
|
Sense directions
|
|
1.0 µm (0.00004 in)
|
|
MP10 retrofit kit
|
|
Includes:
|
|
MP10 hardware only kit
|
|
Part Number: MP10 - NS - KIT
|
|
Stylus overtravel
|
|
Stylus trigger force
(factory set using 50 mm stylus)
|
|
Unidirectional repeatability
(max 2 sigma value)
|
|
+, - XY and + Z
|
|
X and Y:
|
|
+, - 17.5 deg.
|
|
Z:
|
|
8mm (0.31in)
|
|
X and Y:
|
|
75 - 140 gf
|
|
Z:
|
|
490 gf
|
|
MP10 probe with 70 degree OMP
OMM
OMM mounting bracket
MI12 interface
50 mm and 100 mm ceramic styli
Sealtite conduit
9 V alkaline battery
TK1 tool kit
Renishaw Inspection software
Installation and training
|
|
A shank (tool holder) is not included in this kit.
|
|
MP10 probe with 70 degree OMP
OMM
OMM mounting bracket
MI12 interface
50 mm and 100 mm ceramic styli
Sealtite conduit
9 V alkaline battery
TK1 tool kit
|
|
Includes:
|
|
A shank (tool holder) is not included in this kit.
|
