|
© RL Stephens Tool, 2003. All Rights Reserved.
|
|
Site Designed and Maintained by:
|
|
MACHINE TOOL PROBES
Inspection Probes for Machine Centers - MP12
|
|
The MP12 is a compact optical transmission part probing system
for use on small to medium machining centers. The probe is turned on using either an M code or the auto-start feature, and is turned off using either an M code or an internal timer. |
|
1717 North Raymond Avenue • Anaheim, California 92801
|
|
Toll Free: 1 - 800 - 826 - 5133
|
|
Local Phone: 714 - 879 - 6637 • Fax: 714 - 879 - 0911
|
|
Part Number: MP12 - NS - S
|
|
MP12 retrofit kit
|
|
Includes:
|
|
MP10 hardware only kit
|
|
Part Number: MP12 - NS - KIT
|
|
MP12 probe
OMM
OMM mounting bracket
MI12 interface
50 mm and 100 mm ceramic styli
Sealtite conduit
Renishaw Inspection software
Installation and training
|
|
A shank (tool holder) is not included in this kit.
|
|
MP12 probe
OMM
OMM mounting bracket
MI12 interface
50 mm and 100 mm ceramic styli
Sealtite conduit
|
|
Includes:
|
|
A shank (tool holder) is not included in this kit.
|
|
MP12 Probe
|
|
Includes:
|
|
MP12 probe
AA batteries (4)
Tool kit
|
|
Part Number: A - 2075 - 0009
|
|
OMM optical receiver
|
|
Part Number: A - 2033 - 0576
|
|
OMM mounting bracket
|
|
Part Number: A - 2033 - 0830
|
|
MI12 interface
|
|
Part Number: A - 2075 - 0142
|
|
Sealtite conduit
|
|
1/4 in conduit, 5 ft long. Includes one fitting.
|
|
Part Number: SEALTITE, 7455
|
|
Sense directions
|
|
1.0 µm (0.00004 in)
|
|
Stylus overtravel
|
|
Stylus trigger force
(factory set using 50 mm stylus)
|
|
Unidirectional repeatability
(max 2 sigma value)
|
|
+, - XY and + Z
|
|
X and Y:
|
|
+, - 15 deg.
|
|
Z:
|
|
11mm (0.43in)
|
|
X and Y:
|
|
65 - 160 gf
|
|
Z:
|
|
600 gf
|
