|
© RL Stephens Tool, 2003. All Rights Reserved.
|
|
Site Designed and Maintained by:
|
|
MACHINE TOOL PROBES
Scanning & Digitizing Systems - Renscan 200 System
|
|
1717 North Raymond Avenue • Anaheim, California 92801
|
|
Toll Free: 1 - 800 - 826 - 5133
|
|
Local Phone: 714 - 879 - 6637 • Fax: 714 - 879 - 0911
|
|
An on-machine, high speed scanning solution, Renscan 200
uses non-invasive technology to link probe output and machine positioning feedback. |
|
maximum scan speed:
Typical scan speed:
Maximum data rate:
Work envelope:
|
|
40 in/min *
20 to 40 in/min
70 pts/sec *
machine-dependent
|
|
Note: A computer is not included in the kit.
|
|
Specifications
|
|
This simple upgrade path offers Traceout users the
option to enhance their Renishaw scanning system by delivering the latest version of Traceout software. Traceout software upgrades are issued every 12 - 18 months. There are no additional fees based on the version of software you are upgrading from. |
|
* Varies according to machine/controller
|
|
Includes:
|
|
SP2-1 3-axis scanning probe
Traceout CAM software
Probe interface card
Machine interface card
Cable junction
Probe shank (BT30, BT40, CAT30, CAT40 or CAT50)
Installation kit (probe mount, adaptor for Renishaw standard shanks
........and spindle anti-rotaion device)
Styli (3 mm and 6 mm cylinder, 5 mm, 6mm, and 8 mm ball
Installation
On-site training
|
|
Traceout Upgrade
|
|
SOFTWARE UPGRADE
|
|
Part number: A - 2074 - 0703
|
|
Part number: RENSCAN KIT
|
|
The system is also available with a Z-axis
locking mechanism to minimize Z-axis data variance. This is used for profiling operations (e.g. cylinder heads). |
|
Part number: RENSCAN KIT Z-LOCK
|
|
TraceSurf
|
|
The TraceSurf option is a surfacing module
developed in cooperation with Delcam. TraceSurf is capable of creating true surfaces for export to any CAD system in IGES or STL formats. Training is available through an authorized Delcam dealer at an additional price. |
|
Part number: TRACESURF
|
