|
© RL Stephens Tool, 2003. All Rights Reserved.
|
|
Site Designed and Maintained by:
|
|
COORDINATES MEASURING MACHINE PROBES
Touch Probes - SCR200
|
|
The SCR200 stylus changing rack provides rapid, automatic
changing of styli without the need to requalify probe tips. Installation and set-up of the system are achieved with minimal operator skill, as no special CMM cabling, software or communications are required. The SCR200 is powered and serviced entirely by the PI200 interface and is fully crashed protected. |
|
1717 North Raymond Avenue • Anaheim, California 92801
|
|
Toll Free: 1 - 800 - 826 - 5133
|
|
Local Phone: 714 - 879 - 6637 • Fax: 714 - 879 - 0911
|
|
Part Number: A - 1207 - 0030 (standard force modules)
Part Number: A - 1207 - 0070 (low force modules)
|
|
Mounting:
Mounting fiture:
Number of ports:
Module location and retention
repeatability of stylus change at 50mm
I
Change cycle:
|
|
Horizontal or vertical
Single stud
6
Magnetic
Automatic:...-1 µm
Manual:.......-2 µm
<2 seconds
|
|
SCR200 kit
|
|
Includes:
|
|
3 stylus changing modules
Mounting kit
PS2R stylus
Location plate
|
|
SCR200 stylus changing rack only
|
|
Part Number: A - 1085 - 0370
|
|
SCR200 datum stylus (PS35R)
|
|
Part Number: A - 5000 - 7812
|
|
SCR200 cables
|
|
Part Number: A - 1016 - 7630 (PL63S - 5 m)
Part Number: A - 1016 - 7631 (PL64S - 10 m)
Part Number: A - 1016 - 7632 (PL65S - 20 m)
|
|
SCR200 mounting kit
|
|
Part Number: A - 1085 - 0005
|
|
SCR200 location plate
|
|
Part Number: A - 1085 - 0301
|
