|
© RL Stephens Tool, 2003. All Rights Reserved.
|
|
Site Designed and Maintained by:
|
|
COORDINATES MEASURING MACHINE PROBES
Touch Probes - TP200
|
|
The TP200 probe comprises a probe and a detachable stylus
module. The stylus module is mounted via repeatable kinematic joint, providing a rapid stylus changing capability and probe overtravel protection. The TP200 can be used with the full range of Renishaw probe heads and accessories. |
|
1717 North Raymond Avenue • Anaheim, California 92801
|
|
Toll Free: 1 - 800 - 826 - 5133
|
|
Local Phone: 714 - 879 - 6637 • Fax: 714 - 879 - 0911
|
|
Measuring performance *
|
|
Sense directions:
Operational life:
I
Trigger force (at 50 mm)*:
I
Probing speeds:
I
Trigger rate:
Weight:
I
Stylus mounting:
Probe mounting:
Signal Transmission:
I
Interface:
|
|
5/6 way: +, - X, Y and Z
5 x 106 measurement points
minimum
XY.....< 2 g
Z.......< 7 g
Operational:....0.5 to 50 mm/s
Optimum:.......1 to 15 mm/s
Up to 10 points per second
22 g (sensor 15 g, stylus
module 7 g)
M2 x 0.4 thread
M8 brush (polarity sensitive)
Direct, uninterrupted 50 m
cable (maximum)
PI200 only
|
|
Undirectional
repeatability (µm)
|
|
2D form
measurement
deviation (µm) **
|
|
3D form
measurement
deviation (µm) **
|
|
10 mm stylus
|
|
50 mm stylus
|
|
TP200
|
|
(TP2)
|
|
TP200
|
|
(TP2)
|
|
0.30
|
|
(0.35)
|
|
0.40
|
|
(1.00)
|
|
+,-0.04
|
|
(+,-0.80)
|
|
+,-0.80
|
|
(+,-2.50)
|
|
+,-0.65
|
|
(+,-1.00)
|
|
+,-1.00
|
|
(+,-4.00)
|
|
Standard
force module
|
|
Low force
module
|
|
Overtravel
force
(at 50 mm)
|
|
Overtravel
|
|
Maximum
recommended
stylus lengths
|
|
XY
|
|
+Z
|
|
-Z
|
|
XY
|
|
+Z
|
|
-Z
|
|
15 to 35 g
|
|
5 to 10 g
|
|
400 g to 1.4 kg
|
|
100 g to 1 kg
|
|
800 g
|
|
800 g
|
|
+, -14 degrees
|
|
+, -14 degrees
|
|
4.5 mm
|
|
4.5 mm
|
|
2 mm
|
|
2 mm
|
|
Steel
|
|
Renishaw GF
|
|
50 mm
|
|
20 mm
|
|
100 mm
|
|
50 mm
|
|
Maximum stylus mass
|
|
8g @ 50mm
|
|
3g @ 20mm
|
|
* Specified at Trigger Level 1 at 8 mm/s probing speed for standard force and low
force modules.
** Systematic errors contributed by the probe when used for 2D circular and 3D
sperical measurement. |
|
TP200 probe with standard force module
Part Number: A - 1207 - 0001
|
|
TP200 probe with low force module
Part Number: A - 1207 - 0002
|
|
Standard force stylus module
Part Number: A - 1207 - 0010
|
|
TP200 Accessories
|
|
Low force stylus module
Part Number: A - 1207 - 0011
|
|
TP200 probe cleaning kit
Part Number: A - 1085 - 0016
|
|
GF stylus kit
Part Number: A - 5003 - 2310
|
