|
© RL Stephens Tool, 2003. All Rights Reserved.
|
|
Site Designed and Maintained by:
|
|
MACHINE TOOL PROBES
Tool Setting Probes for Machining Centers - TS27R
|
|
1717 North Raymond Avenue • Anaheim, California 92801
|
|
Toll Free: 1 - 800 - 826 - 5133
|
|
Local Phone: 714 - 879 - 6637 • Fax: 714 - 879 - 0911
|
|
TS27R retro kit
|
|
Includes:
|
|
TS27R probe
MI8 interface
Sealtite kit
Renishaw toolsetting software
Installation and training
|
|
Part number: TS27R - S
|
|
TS27R probe module (no stylus or holder)
Part number: A - 2000 - 0369
|
|
TS27R hardware only kit
|
|
Includes:
|
|
TS27R probe
MI8 interface
Sealtite kit
|
|
Part number: TS27R - KIT
|
|
TS27R holder
Part number: A - 2008 - 0371
|
|
TS27R 100 mm riser
Part number: A - 2008 - 0866 - RI - KIT
|
|
The TS27R is a toolsetter for vertical machining centers that
enables the user to set both tool length and diameter of rotating tools, and to carry out broken tool detection. |
|
Sense directions
|
|
1.0 µm (0.00004 in)
|
|
Stylus overtravel
|
|
Stylus trigger force
|
|
Unidirectional repeatability
(max 2 sigma value)
|
|
+, - XY and + Z
|
|
X and Y:
|
|
+, - 10 deg.
|
|
Z:
|
|
5.5mm (0.21in)
|
|
80 - 170 gf
|
|
TS27R probe, stylus, and holder kit
|
|
Part number: A - 2008 - 0368
|
|
MI8 interface
|
|
Part number: A - 2037 - 0010
|
|
TS27R break protect link
Part number: A - 2008 - 0379
|
|
TS27R stylus holder with 4 set screws
Part number: A - 2008 - 0389
|
|
TS27R stylus holder set screws
Part number: P - SC13 - 0403
|
|
TS27R tungstan carbide stylus (0.5 in disc)
Part number: A - 2008 - 0382
|
|
TS27R ceramic stylus (19 mm square)
Part number: A - 2008 - 0384
|
|
TS27R crank or horizontal machining centers
Part number: A - 2008 - 0448
|
|
TS27R stylus (0.5 in disc)
Part number: M - 5003 - 1033 (steel)
Part number: M - 2008 - 0197 (ceramic)
|
